10000TL Series Features:

• 10,000 lbs. capacity

• Drive-over ramps and side rails provide the width to support wider vehicles while approaching and exiting the lift

• Dual lifting cylinders provide the power required to lift a 10,000 lbs. vehicle

• The 10000TL comes with four 3-position adapters, four 3" rubber blocks and four 1-1/2" rubber blocks for added height

 

 

 

Click here for the 10000 TL Brochure

 

Specifications	10000TL
Capacity	10,000 lbs. (4536kg)
Length Overall	90-1/2" (2299mm)
Width Overall	78-1/2" (1994mm)
Width Between Platforms	22-3/4" (578mm)
Length of Platforms	51-1/4" (1301mm)
Length of Pad	17" (7239mm)
Outside Width of Platforms	70-3/4" (432mm)
Horizontal Movement (during rise)	16" (406mm)
Collapsed Heigh	4" (102mm)
Locking Leg Heights	13-3/8" (340mm), 17-3/8" (441mm), 21-3/8" (543mm)
Voltage*	115v
Time of Full Rise	40 seconds
Rise High Step	30-5/16" (770mm)
Rise Mid Step	28-5/16" (719mm)
Rise Low Step	26-5/16" (668mm)
Rise Tall Pad	24-3/4" (627mm)
Rise Short Pad	23-1/4" (591mm)
Rise Flat	21-3/4" (552mm)
* single phase standard; 3-phase available at additional cost

 

Click here for the 10000 TL Brochure

 

---

Click here for information on Lift Safety