|
|
|
Pro 9D: 2 Post Auto Lift
$2,295CDN
Call us for our current promotions!
The Pro 9D car lift is a commercial grade automotive lift. We
have sold thousands of the Pro 9D car lifts to both commercial
garages and private residences. The Pro 9D car hoist is powered
by a 220 Volt (single phase) power unit that can be mounted on
either side of the above ground lift.
|
|
 |
- Commercial
grade
- Single
point lock release
- Overhead
model
- Powder coat
finish
- 9,000 LB.
capacity
- 11' 10"
tall
- Truck
adapters included
- Asymmetric
arm design
- Symmetric
post design
- Anchor
bolts included
- 5 Year
Structural Warranty, 2 Year Power Unit
-
Click
here to
download the Pro-9D Manual
Back to 2 Post
Lifts
|
|
Nationwide Pro 9D Specifications
|
|
Capacity |
9,000 LB. |
|
Lifting Time |
45 Seconds |
|
Overall Height |
142" (11' 10") |
|
Overall Floor Width |
134" (11' 2") |
|
Maximum Lift Height |
77 1/2" (6' 5 1/2") |
|
Minimum Pad Height |
3 1/2" |
|
Inside Column |
110" (9' 2") |
|
Column Size |
7" x 11" |
|
Column Thickness of Steel |
5 gauge (.2 , 5 mm) |
|
Drive Thru |
92 1/2" (7' 8 1/2") |
|
Base of Lift |
13 1/2" x 18" |
|
Motor |
2 HP, 220 Volt, Single Phase |
|
Shipping Weight |
1,470 LB |
|
The Pro 9D car
lift is a commercial grade automotive lift. We have
sold thousands of the Pro 9D car lifts to
both commercial garages and private residences. The
Pro 9D car hoist is powered by a 220 Volt
(single phase) power unit that can be mounted on
either side of the above ground lift. The Pro 9D car lift includes a complete set of solid peg
type truck adapters. The mounting hardware for the
Pro 9D is also included with the lift
package.
The Pro 9D two post above ground lift has
symmetrical columns and asymmetrical arms to allow
easy access to the widest of vehicles. This car lift
includes two additional lifting pads that offer an
infinite amount of lifting points for the rear lift
arm.
The Pro 9D has single point release, set of
truck adapters, overhead above ground lift
configuration, asymmetric arms, and additional sliding
lift pads.
The Pro 9D above ground lift should be
installed on a concrete floor. This concrete floor
should have a minimum of four (4) inches of concrete
with 3000 PSI strength.
Manufactured in a 100% American owned offshore
factory.
Most of our above ground lift customers install their
own car lifts. The average time to install the
Pro 9D car lift is four hours.
Back to 2 Post
Lifts
|
|
|
|
Home |
2 Post Lifts |
4 Post Lifts
|
Motorcycle
Lifts
|
Scissor Lifts |
Accessories
|
Commercial Equipment
|
Privacy |Contact
DirectLift.ca is a Division
of
ADG Forward Canada
Inc.
Copyright 2006-2008. All Rights
Reserved
Website By:
Northern
Website Design
Prices listed on website
are subject to change without notice. Prices are in Canadian Dollars
and are subject to GST and PST where applicable.
|